Installation · Canada
Fit Your Tracker.
Choose your model below for installation steps. Have your device and its supplied instructions to hand.
Pulse 4G
Plug In. Ready to Activate.
Vehicle-powered tracking through a compatible OBD2 port. No hardwiring required.

- Find the OBD2 Port.Locate the diagnostic port using your vehicle handbook, usually beneath the dashboard. Check there is enough space for the tracker.
- Plug In Your Tracker.With the vehicle safely parked, insert the tracker securely. Make sure it does not obstruct the pedals or driver controls.
- Activate and Check.Choose your tracking plan, then take a short outdoor drive and confirm the vehicle appears in your Track Wise account.
Choose the Pulse 4G version supplied for your country.
Core 4G
Two Connections. A Discreet Fit.
Secure the tracker in a suitable protected location, following the supplied installation instructions.

- Connect to the Battery.Simply attach the fork connectors directly to the battery terminals: red to positive (+), black to negative (−).
- Secure Your Tracker.Stick the tracker to the battery with the supplied adhesive pad and secure the wiring. Follow the fitting instructions supplied with your device.
- Activate and Confirm.Choose your tracking plan, take a short outdoor drive and check the first location and journey in your account.
Alternative connection: connect the red wire to a suitable permanent positive power supply and the black wire to ground. If you are unsure about the vehicle wiring, consult a qualified electrician.
First Login & Setup
Set your map and time zone, then check your first journey.
Finish your setup →02Common Questions
Find answers about installation, activation and tracking.
Browse help →03Need a Hand?
Get help from the Track Wise team with fitting your device.
Contact support →