Installation · UK

Fit Your Tracker.

Choose your model below for installation steps. Have your device and its supplied instructions to hand.

Pulse & Pulse 4G

Plug In. Ready to Activate.

Vehicle-powered tracking through a compatible OBD2 port. No hardwiring required.

Track Wise Pulse OBD2 plug-in vehicle tracker
  1. Find the OBD2 Port.Locate the diagnostic port using your vehicle handbook, usually beneath the dashboard. Check there is enough space for the tracker.
  2. Plug In Your Tracker.With the vehicle safely parked, insert the tracker securely. Make sure it does not obstruct the pedals or driver controls.
  3. Activate and Check.Choose your tracking plan, then take a short outdoor drive and confirm the vehicle appears in your Track Wise account.

Pulse is a UK-only model. Choose the correct regional version of Pulse 4G for your vehicle.

Core 4G

Two Connections. A Discreet Fit.

Secure the tracker in a suitable protected location, following the supplied installation instructions.

Track Wise Core 4G hardwired tracker with red and black fork connectors
  1. Connect to the Battery.Simply attach the fork connectors directly to the battery terminals: red to positive (+), black to negative (−).
  2. Secure Your Tracker.Stick the tracker to the battery with the supplied adhesive pad and secure the wiring. Follow the fitting instructions supplied with your device.
  3. Activate and Confirm.Choose your tracking plan, take a short outdoor drive and check the first location and journey in your account.

Alternative connection: connect the red wire to a suitable permanent positive power supply and the black wire to ground. If you are unsure about the vehicle wiring, consult a qualified electrician.

Scroll to Top